• Call 0800 270 7440 for expert help
  • Free Delivery on orders over £50
  • Next Day Delivery if you order before 12:00

Sol Plus Guard Geobubble Covers Standard Sizes


The Sol+Guard Geo Bubble cover is an innovative swimming pool bubble cover material that is sold in a all shapes and sizes.

 

The product has a unique two ply combination, a clear top surface and a translucent tinted underside. Tests carried out, in collaboration with Brighton and London Metropolitan Universities, prove that the more translucent a bubble cover is, the greater the penetration of solar energy into the pool water. This cover is at the top of its class in allowing the maximum amount of solar gain.

 

 

 

 

 

 



Heat Retention Qualities    
Solar Gain Qualities    
Durability    

Suitable for Outdoor Pools    
Suitable for Indoor Pools    
Suitable for UK    
Suitable for Warmer Countries    

- Light blue/clear throughout

- 0.48kg per sq.m

- 5 year pro rata warranty (UK & Eire Only) 

 

 

 

Pool Size RRP Our Price
10ft x 20ft £218.00 £126.00 incl VAT & Delivery
12ft x 24ft £309.00 £180.00 incl VAT & Delivery
14ft x 28ft £421.00 £243.00 incl VAT & Delivery
15ft x 30ft £479.00 £278.00 incl VAT & Delivery
16ft x 32ft £546.00 £316.00 incl VAT & Delivery
20ft x 40ft £853.00 £491.00 incl VAT & Delivery

 

 

        

The Sol+Guard Geo Bubble cover has the ability to provide a variety of benefits to the end-user. This ranges from reducing the heating and maintenance costs and the personal desire to save natural resources, to the practicalities of reducing energy and water usage.

The tough durable 500 micron cover used for the Sol+Guard Geo Bubble are formulated for climate conditions in various continents of the world depending on UV (ultra violet) weathering intensity. The Sol+Guard Geo Bubble is supplied in two UV formulations: one for areas up to 140 kLys/yrs (Kilolangley years) and one for up to 180kLys/yrs. The additives we use combine weather and chemical resistant pigments with high performance light, weather and chemical stabilisation. The additives used are non-toxic and registered in Australia, Canada, China, EU, Japan, Korea, Philippines and USA.

 

Increase pool temperature by up to 8°C through solar energy gain

 

The unique two ply combination of a Sol+Guard cover allows maximum solar gain to pass through the cover increasing the pool temperature by up to 8OC

 

Eliminate Water Evaporation by 98% +

 

With a Sol+Guard Geo Bubble pool cover you will be able to eliminate water evaporation by over 98%, thus greatly reducing your water consumption and your water charges, as well as saving a vital natural resource.

Research was carried out in collaboration with the Brighton and London Metropolitan Universities, which proved that the evaporation loss in the UK for an average sized pool, 4m x 8m, is approximately 32,000 litres per year. This figure is considerably higher for hotter climates.

 

Reduce Chemical Consumption by up to 30%

 

A Sol+Guard Geo Bubble cover can help reduce chemical losses by evaporation by up to 30% when it is in use. All pool chemical levels and treatment should be maintained at the manufacturers recommended level.

 

Reduce Energy Consumption by over 50%

 

A Sol+Guard Geo Bubble cover will eliminate evaporation and greatly reduce radiation. The heat retention tests carried out in collaboration with the Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%. This applied to oil, gas, electric heater or heat pump usage. Where solar heating is used, it is possible to invest in up to half the amount of panels normally required for a pool without a cover.

 

Reduce Debris Contamination

 

Debris such a leaves, dirt, insects and bird droppings are not only unsightly in a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the water.

 

Save Money

 

A Sol+Guard Geo Bubble cover will save money by reducing water, energy, cleaning and chemical costs. The Sol+Guard Geo Bubble pool cover will pay for itself in less than a year.

 

Warranty

 

The Sol+Guard Geo Bubble cover has a 5 year pro rata warranty. 

 

Environmental Benefits

 

By reducing the amount of energy needed to heat and filter your pool water, a Sol+Guard Geo Bubble cover will greatly reduce your carbon footprint. It also conserves water and, at the end of its life, this cover is 100% recyclable.

Price From: £126.00
Please Select Your Size:
Would You Like A Factory Fitted Leading Edge Kit?:
Prices start from: £126.00 inc VAT
Quantity :
You may also be interested in these other items
500 micron Blue Gold Solar Swimming Pool Covers Standard sizes £105.00
MORE DETAILS
400 micron Blue Silver Solar Swimming Pool Covers Standard sizes £84.00
MORE DETAILS