The new Solartron Roller offers the size and robustness of a light commercial roller, but with the convenience and flexibility of a self contained solar powered roller. Installation can be fully retrospective, no wiring to any other point around the pool is required and the roller operates solely from batteries charged through the solar panels.

Twin solar panels are mounted in a rotating housing angled at 30 degrees, the angle proven to be most effective for solar gain. The panels rotate through 360 degrees and so can be located, and then locked, at the optimum position to gain the maximum solar rays for each individual pool surround. The control equipment for the in-roller motor is secured to the support bracket and housed within the UPVC housings. All connections are simple jack plug and socket there is no wiring of any kind required simply mount the roller in its required position, insert the three jack plugs in the relevant sockets, secure the solar panels to the required position, place the housings over the bracket and the roller is ready to operate.

The single piece tube can be manufactured to the required pool width, up to 7.5m, and the roller can be supplied with or without a cover/cover connection piece.

Features
- Fully rotating, pre angled solar panels for optimum solar gain positioning.
- Sturdy UPVC housings
- Simple plug-and-play connection; no wiring required.
- Stand alone self functioning unit no mains power required.
- Trickle charge batteries housed in splash proof case within the UPVC housings. Batteries supplied pre-charged for immediate use.
- Key switch control for simple on, off operation.
- Adjustable delay timer to allow pause before cover dispenses onto pool.
- In roller 60Nm 24v motor with adjustable start and stop limits to allow accurate and automatic positioning of cover.
- Sturdy one piece tube and support brackets ¬suitable for pools up to 7.5m x 15m.
- Suitable for all solar and heat retention covers.